License Plate Light Repair

3D print ABS license plate light holder and a semi-transparent lens, made from flexible material.  Replace the broken and aging stock license plate light.

Lens is made from flexible material and is semi-transparent makes it stronger

PXL_20210107_132636814~2.jpg

Pull it out in this direction. this white holder is an early prototype.

Final product is black color ABS plastic. 

PXL_20210107_132734783.jpg

Remove two screws and the light bulb, then the lens can be removed

PXL_20210107_132753542.jpg

Separate bulb holder and the rubber from the old housing.

PXL_20210107_132810348.jpg

Install bulb holder and the rubber boot to the new housing

Test it before install it

PXL_20210107_132837247.jpg

make them this direction

PXL_20210107_132950191.jpg

Align the metal sheet to the upper edge of the housing and slide it in.

PXL_20210107_143848337.jpg

it should be like this now.

PXL_20210107_132005848~2.jpg

Voila